VideoX V3 Professional Quickstart Guide #
Windows 10 Enterprise #
Box Contents:
- One R12P VideoX V3 Professional Appliance
- Rackmount Rail Kit
- Two AC power cords
- VideoX V3 Professional Front Bezel / Cover
Step 1 – Unpack the components
The VideoX V3 Professional Appliance is shipped without its hard drives installed. Operating system SSDs or database SSDs are shipped installed. Carefully remove the VideoX V3 Professional Appliance from its shipping box.
Step 2 – Install the Rackmount Kit on the Chassis
A rackmount rail kit is included with VideoX V3 Professional Appliance. Refer to the documentation shipped with the rackmount rail kit.
Step 3 – Cabling the VideoX V3 Professional
The VideoX V3 Professional Appliance requires two AC power sources. Connect both power cords. Only connect a monitor to the VGA port. Connect a keyboard and mouse to any available USB port. Network connectivity is required during the operation of the VideoX V3 Professional. Plug in at least one Ethernet cable into an Ethernet port of the VideoX V3 Professional. A network cable should also be connected to the management port for later usage.
Step 4 – Install Hard Disk Drives
Before powering on the VideoX V3 Professional insert all the hard disk drives into the chassis. Each hard disk drive/tray that was received should be inserted into the chassis. Verify that the serial number marked on each hard disk drive/tray match the serial number of the VideoX Professional Appliance. Install the hard disk drives into the empty hard disk slots of the VideoX V3 Professional Appliance in any order. Make sure to press the drive carrier handle closed until it clicks in place and that the drive trays all sit flush with the chassis.
Step 5 – Power on the server
To turn on VideoX V3 Professional, press the power button located on the front-left of the VideoX V3 Professional. The system will power on. During this time, the hard drive activity LEDs on the VideoX V3 Professional will blink. Allow the VideoX V3 Professional to boot into Windows® 10 Enterprise operating appliance.
Step 6 – Windows® Setup
Once the VideoX V3 Professional completely boots, follow the onscreen instructions to complete the Windows® 10 Enterprise LTSC 2021. Follow the onscreen prompts. It is recommended that a local user be created. Create a user and password for the system. The user and password created will create the only set of credentials that can be used to log into the system. Arxys is unable to reset this account.
Step 7 – Logging into the VideoX V3 Professional
Follow the onscreen instructions to log in using the password set in step 6
Step 8 – Installation of Video Management Software
The VideoX V3 Professional can be shipped with various video management platform packages. If a specific VMS package was requested with the purchase of the appliance, the platform installation package will auto run when the system is first used. The platform installation packages will be located in the folder located at C:\ArxysSupport\Applications. For additional information on installing, licensing, and configuring VMS see the VMS documentation.
Step 9 – Windows Updates
Microsoft® routinely release updates and patches to improve stability and security of the Windows® 10 Enterprise LTSC 2019 operating system. Any updates released after the VideoX Professional has shipped will need to be applied.